User manual

12
5.2.5 Eighth Line: dot strength
The strength with which the pins in the Braille cells are set can be amended here, i.e.
set them to feel hard and sharp, or soft and round.
Menu 8: Dot strength
Dot strength: 1 2 3
Dot strength: 1 2 3
5.2.6 Ninth line: Restore factory settings
This option allows the Braille display settings to be restored to their status at the time
of delivery. Click on one of the cursor routing/position keys above a word.
Menu 9: Restore factory settings
Restore factory settings
Restore factory settings
The factory settings are as follows:
- Comm. Channel to PC: (auto)
- Protocol: default (new BAUM protocol)
- Auto-power-off: after 15 minutes
- Dot strength: 3
- Sound volume: 3
“BAUM VarioPro (xxxxxxxx)”, where xxxxxxxx
is the serial number.
5.2.7 Tenth line: Quit menu and save settings
Press one of the position keys above the word “off”. When quitting the menu all
changes will be saved automatically, and the Braille display will resume its normal
user status.
Menu 10: “menu off”
Menu off