User manual

11
Protocol: default vario80 ht pb1 pb2
The appropriate protocol (emulation) for your particular screen reader must be
selected.
5.2.2 Fifth line: Communications Channel
Select the port to be used for data transfer between the PC and the Braille display.
‘Auto’ is the default setting which means that the correct port will be selected
automatically.
Menu 5: Comm. Channel
Comm. channel: auto usb serial
Comm. Channel: auto usb serial
5.2.3 Sixth line: Auto-power-off
Set the length of time after which the Braille display will shut down automatically,
when no more data are to be transferred and no keys pressed. The options are: 5
minutes, 15 minutes, 1 hour, 2 hours, never. Press the cursor routing/position key
above the desired setting (15 minutes is the standard length).
Menu 6: Auto-power-off
Auto-power-off: 5min 15min 1h 2h never
Auto power off: 5min 15min 1h 2h never
5.2.4 Seventh line: Sound volume
Here the sound volume can be adjusted, and the tones can be switched on and off.
A sample tone will be emitted after changes to the volume are made.
Menu 7: Sound volume
Sound volume 0 1 2 3 4 5
Sound volume: 0 1 2 3 4 5