User manual

5.1.3 Third line: serial number

This shows the serial number of the Braille display

Menu 3: “Serial number”

Serial number: xxxxxxxx

5.2 The advanced System Menu

The additional options here allow you to optimise the set-up of your Braille display.

You can select the communication channel/port and protocol (emulation), change the

values of the auto-power-off and volume, or restore the factory settings.

All settings are saved as soon as you quit the System Menu.

All current and selected settings are indicated by Braille dots 7 and 8 underneath the

relevant value.

To select, simply press one of the cursor routing/position keys above the relevant

value.

Open the advanced System Menu by first pressing both outer cursor routing/position

keys, and then both upper display keys (P1, P80, D1, D4, or P1, P64, D1, D4). Hold

all four keys for at least 5 seconds or until the device beeps.

The menu will open at the last entry “Menu off”; use D1 and D3 to browse through the

menu options.

5.2.1 Fourth Line: protocol/emulation

The protocol (emulation) can be set here. The following protocols are available:

default (the new BAUM protocol)

vario 80 (old BAUM protocol)

ht (Handy-Tech)

pb1 (PowerBraille)

pb2 (PowerBraille)

Menu 4: Protocol

Protocol: default vario80 ht pb1 pb2