User`s manual

GOT812 Series User’s Manual

AMI BIOS Setup Utility

 Video Power Down Mode

This option specifies the Power State that the video subsystem enters when

the BIOS places it in a power saving state after the specified period of

display inactivity has expired. The default setting is Suspend.

Disabled

This setting prevents the BIOS from initiating any power saving modes concerned with

the video display or monitor.

Suspend

This option places the monitor into suspend mode after the specified period of display

inactivity has expired. This means the monitor is not off. The screen will appear blacked

out. The standards do not cite specific power ratings because they vary from monitor to

monitor, but this setting use less power than Standby mode. This is the default setting.

 Hard Disk Drive Power Down Mode

This option specifies the power conserving state that the hard disk drive

enters after the specified period of hard drive inactivity has expired. The

default setting is Suspend.

Disabled

This setting prevents hard disk drive power down mode.

Suspend

This option cuts the power to the hard disk drives during a system suspend. This is the

default setting.

 Suspend Time Out (Minute)

This option specifies the length of time the system waits before it enters

suspend mode. The default setting is Disabled.

Disabled

This setting prevents the system from entering suspend mode. This is the default

setting.

1 Min

Set this item to allow the computer system to enter suspend mode after being inactive

for 1 minute.

4 Min

Set this item to allow the computer system to enter suspend mode after being inactive

for 4 minutes.

10 Min

Set this item to allow the computer system to enter suspend mode after being inactive

for 10 minutes.

 Throttle Slow Clock Ratio

Use this item to specify the speed of the system clock when running the

power saving states.