Specifications

HOW TO USE BAR CODE PEN READER CE-1601N
For the use of CE-1601N and connection with the PC-1600, please read the CE-1601N
operation manual carefully. ln addition, please pay attention to the following points
when using CE-1601N.
(1) When the computer power is low, connect CE-1601N after replacing the batter
ies. (For procedure to replace betteries, please refer to computer operation
manual.)
When the power is low, the BATT indicator on the display will Iight up.
Since the power can also become low when CE-1600P is connected, press SHIFT
ON and confirm whether BATT indicator goes out or not. When it does not go out,
this signifies that the power is low.
Also, in the case that there is not enough power to activate the confirmation tone
when reading bar codes, the BATT indicator will light up and the confirmation
tone w ill not ring.
ln this case, SHlFT ON are pressed, the indicator will go out, but if operation is
continued, the power will become even lower and the indicator will no longer go
out.
24