Technical data

Rev.February 1996 Conti-Dryer Page 15
CD 25-600
4.0 ASSEMBLY / DISASSEMBLY
4.1 Assembly
The Conti-Dryer is designed for assembly directly on the processing machines replacing
the machine hopper.
If the Conti-Dryer fl ange does not match the hopper fl ange on the processing machine, it is
necessary to make an intermediate fl ange.
4.1.1 Assembly fl ange
The Conti-Dryer is supplied fully equipped. The machine is lifted in the transversed lifting
fi xture (10) on the frame, as shown in the sketch.
R1628
WARNING: Lifting, as illustrated, must be done only with the hopper being depleted.
Assembly dimensions: see dimensioned sketch section 3.3