Technical data

Rev.February 1996 Conti-Dryer Page 9
CD 25-600
3.2 Typeplate
The typeplate is located on the side of the control containing all electrical data for
connections. The serial number consists of a code (A)(B), a type number (C) and a serial
number (D).
3.2.1 Code (A) and (B):
The fi rst and last digit (A) in the code indicate the year in which the machine was produced.
E.g. 9ST5 = 1995.
The two middle letters (B) in the code indicate whether the machine is a standard model or not.
ST = Standard apparatus
SP = Special construction meeting the customer’s requirements
HT = HT/LT model
EX = Special mark for remote controls
ES = Special mark for substitute controls
3.2.2 Type (C)
The type number consists of two digits that indicate the machine type:
CD 25: 91
CD 50: 92
CD 90: 93
CD 180: 94
CD 350: 95
CD 500: 96
CD 600: 97
3.2.3 Serial number (D)
The serial number consists of fi ve digits that refer to the exact production number of the
machine.
The serial number consists of a code (A)(B), a type number (C) and a serial number (D).
3.2.4 Serial number (D)
The serial number consists of fi ve digits that refer to the exact production number of the
machine.
R1645