Service manual

CD-RW5000
– 24 –
Table 24. TEST-TuSet preset frequencies
Unused channels are indicated with "_".
'%' indicates the last channel for each band.
All FM bands are preset to FM monaural.
BAND
1 % FM 87.5 MHz
2 FM108.0 MHz
3 FM FM 90.0 MHz
4 FM106.0 MHz
5 FM 98.0 MHz
6 % AM 530 kHz
7 AM1720 kHz
8 AM AM 600 kHz
9 AM1400 kHz
10 AM 990 kHz
11-40
U.S.A.CH
Pickup mechanism error E-CD01 Slide motor operation error (PU-IN SW detection NG)
Tray error E-CD20 Tray open/close operation error
Changer mechanism error E-CD10 Changer mechanism operation error
CD error messages
Errors
Messages
Remarks
Relation to RDS WEAK SIG When switching to an EON station,
EON reception impossible it cannot be received due to weak signal.
PLL UN LOCK Frequency Reception error or PLL control error
indicator
flashing
TUNER error messages
Errors
Messages
Remarks
You tried to record on a tape 'PROTECTED'
removing the recording
prevention tabs.
TAPE mechanism error E-TA01 Mechanism initialize abnormal end
TAPE error messages
Errors
Messages
Remarks
ERROR MESSAGE LIST
There are no tracks on the disc. 'NO TRACKS'
When digitally recording from a copy-inhibited source. 'CAN' T COPY'
Error during recording. 'CAN' T REC'
Error when entering the recording the recording/edit mode. 'DISC ERROR'
There is no free area on the disc when recording. 'DISC FULL'
There is no space for the name information memory. 'MEMORY FULL'
***% of the name information memory is being used. 'MEMORY ***%'
There is nothing in the name information memory. 'MEMORY EMPTY' When you tried to erase the
memory.
It is decided that there is no disc. 'CD-R NO DISC'
A track other than audio is played back. 'NOT AUDIO' Displayed when playback sound
is not output.
You tried to record on or edit a finalized disc. FINALIZED CD
Pick calibration error 'OPC ERROR'
Signal is not synchronized when recording using the digital input. 'NO SIGNAL'
It is detected that it is a disc other than audio CD-R. '? DISC'
CD-R error messages
Errors
Remarks
Messages