Operating instructions

Advanced Features

■

Timer playback/Timer recording

Before setting timer:

While the power is turned off, press the DISPLAY button on the re-

mote control to check that the clock is on time.

1 Press the POWER button to turn the power on.

2 Press the MENU button.

3 Turn the jog dial to select “TIMER PLAY” or “TIMER REC” mode

and within 10 seconds, press the ENTER button.

For timer playback: For timer recording:

4 “ PLAY” or “ REC” will flash for 5 seconds.

Press the ENTER button during the flash.

5 Turn the jog dial to specify the hour to start and within 10 sec-

onds, press the ENTER button.

● The illustrations show the timer playback setting.

Timer and Sleep Operation

Timer playback:

The unit turns on and plays the desired source (CD, CD-R/CD-RW, tuner, tape) at the

preset time. At the end time, the unit enters the power stand-by mode automatically.

Timer recording:

The unit turns on and starts recording from the tuner at the preset time.

At the end time, the unit enters the power stand-by mode automatically.

*RW5000_P38_42(Advanced) 00.7.14, 11:29 AM38