Operating instructions

34
CD-R Operation
Text editing on a CD-R or a CD-RW (continued)
■ Erasing disc and track names
1 Load a CD-R or CD-RW disc. (See page 28.)
2 Press the CDR button, then press the TEXT EDIT button.
● If it is a finalized CD-R disc, “FINALIZED CD” appears. You can not perform
text erasing on the disc.
● If it is a CD-RW disc, “UNFINALIZE ?” appears. Press the ENTER button to
unfinalize it.
To change a character:
Example) To change “BEET” to “BEST”
1. Perform steps 1 - 4 in the “Naming discs and tracks” section on page 33.
2. Press the 3 or 2 button on the unit to flash
the character to change.
3. Select a character to enter using the jog dial,
then press the ENTER button.
4. Press the ■ button to finish.
To add a character:
1. Perform steps 1 - 4 in the “Naming discs and tracks” section on page 33.
2. Press the 3 or 2 button on the unit to flash the character before which you want
to add a new character.
3. To enter a space, press the ENTER button.
4. Select a character to enter using the jog dial, then press the ENTER button.
5. Press the ■ button to finish.
To delete a character:
1. Perform steps 1 - 4 in the “Naming discs and tracks” section on page 33.
2. Press the 3 or 2 button on the unit to flash the character to delete.
3. Press the DELETE button.
4. Press the ■ button to finish.
3 Select “TEXT ERASE” using the jog dial, then press the ENTER
button.
● “No Text” appears if no names are entered.
● To cancel the operation, press the ■ button.
4 Select the item you want to erase using the jog dial, then press
the ENTER button.
● “No Text“ appears if no names are entered.
● To cancel the operation, press the ■ button.
5 Press the ENTER button again.
Example) Album artist
● If no name is written, “No Text” appears. After 2 seconds, the display returns
to step 4.
6 To erase other artist or title names, repeat steps 4 and 5.
7 Press the ■ button to finish.
● If it is an unfinalized disc, re-finalize it. (See page 36.)
*RW5000_P27_37(CD-R) 00.7.14, 3:52 PM34