Operating instructions

26
Cassette Recording
Recording from the radio
1 Tune in to the desired station. (See page 23.)
2 Load a cassette into the compartment with side A facing you.
3 Press the REV. MODE button to choose a recording mode, one
side or both sides.
4 Press the TAPE REC button repeatedly to switch to the side you
record on.
Recording will be paused.
To record on both sides, begin on side A. (If recording is started from side B,
the tape will not switch over to side A.)
5 Press the
0606
0606
06 button to record on side A, or the
11
11
1 button for
side B.
When you press the 06 button on the remote control, the system will record
on the side specified in step 4.
To interrupt recording:
Press the TAPE REC button.
To resume recording, press the same recording button you pressed in step 5. Other
buttons do not allow resuming.
To stop recording:
Press the button.
Note:
If you hear a whistling noise while recording an AM station, move the AM loop antenna.
Erasing recorded tapes
1. Press the TAPE button.
2. Follow steps 2 - 5 in “Recording from the radio”.
Recording to a Cassette Tape (continued)
.... To record on both sides.
.... To record on only one side.
*RW5000_P25_26(Recording) 00.7.13, 3:15 PM26