Operating instructions

25
Cassette Recording
Recording to a Cassette Tape
● When recording important selections, make a preliminary test to ensure that the
desired material is properly recorded.
● The volume and sound controls can be adjusted with no effect on the recorded
signal (Variable Sound Monitor).
● Do not use metal and CrO2 tapes for recording.
■
Recording from a CD
You can record the desired CD using the DISC 1 - DISC 6 buttons.
1 Press the POWER button to turn the power on.
2 Press the CD button and load the desired disc.
3 Load a cassette into the compartment with side A facing you.
Recording from several CDs continuously:
1. Follow the above steps 1 - 5.
2. Regardless of the tape setting (step 5), press the 06 button to record on side A, or
the 1 button for side B.
● Recording will start from the lowest numbered disc.
To perform programmed recording:
1. Program discs and tracks (page 20).
2. Press the TAPE REC button.
3. Regardless of the tape setting (step 5), press the 06 button to record on side A, or
the 1 button for side B.
To stop recording:
Press the ■ button.
The CD and tape will stop.
Auto restart function:
If the recording side is switched from side A to B during recording, the system will
record the interrupted track on side B from its beginning.
The recording will be made without cutting the beginning of the track on side B.
4 Press the REV. MODE button to choose one side or both sides.
5 Press the TAPE REC button repeatedly to switch to the side you
record on.
● Recording will be paused.
● To record on both sides, begin on side A. (If recording is started from side B,
the tape will not switch over to side A.)
6 Press one of the DISC 1 - DISC 6 buttons to start recording.
● When the CD reaches the end, recording will stop.
.... To record on both sides.
.... To record on only one side.
*RW5000_P25_26(Recording) 00.7.13, 3:15 PM25