Operating instructions

20
Playback
Advanced CD Playback (continued)
■
To specify a disc to play
You can play a disc by specifying the disc number.
Press one of the DISC 1 - DISC 6 buttons to select the desired disc.
● Only the chosen disc will be played and stopped automatically.
Note:
When one of the DISC 1 - DISC 6 buttons is green, it is ready to play that disc.
If there is not a disc on the tray, playback will not begin and the button will turn dark.
To stop playback:
Press the ■ button.
Selected disc number
■
Programmed play
By specifying discs from 1 to 6, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
1 While in the stop mode, press the MEMORY button to enter the
programming save mode.
2 Press one of the 1 - 6 buttons to select the desired disc.
3 Use the
55
55
5 or
44
44
4 button on the remote control or the jog dial on
the main unit to select the desired track.
4 Press the MEMORY button to save the track number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be pro-
grammed.
6 Press the
0606
0606
06 button to start playback.
● At this time, playback will not begin even if one of the DISC 1 - DISC 6
buttons is pressed.
To cancel the programmed play mode:
While in the stop mode, press the CLEAR button. The MEMORY
indicator will disappear and all the programmed content will be
cleared.
Notes:
● Opening any tray of the programmed discs automatically cancels the programmed
sequence.
● Even if you press the POWER button to enter the stand-by mode or change the
function from CD to another function, the programmed selections will not be cleared.
● During program operation, random play is not possible.
Playback
order
Selected track
number
Selected disc number
Playback time
*RW5000_P18_24(Playback) 00.7.13, 3:14 PM20