Specifications

03/12/17 CD-MPX870 01-13.fm
E-10
ENGLISH
CD-MPX870W
CD-MPX870
Preparation for Use
 Antenna connection
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
 Speaker connection
Connect the black wire to the FRONT SPEAKERS minus (-) terminal,
and the red wire to the FRONT SPEAKERS plus (+) terminal.
 Speaker Light-Up connection
Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
jacks for speaker illumination. To turn off the speaker light-up fea-
ture, press the CLEAR/DIMMER button on the remote control for 2
seconds or more.
Note:
Placing the right speaker light-up wire to the RIGHT jack and the left
speaker light-up wire to the LEFT jack.
Caution:
Supplied FM antenna:
Connect the FM antenna wire to the
FM 75 OHMS jack and position the FM
antenna wire in the direction where the
strongest signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the
AM and GND terminals. Position the
AM loop antenna for optimum
reception. Place the AM loop antenna
on
a shelf, etc., or attach it to a stand
or a wall with screws (not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
ANTENNA
FM
75 OHMS
AM
GND
AM loop
antenna
FM
antenna
Red
Blac
k
 Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
 Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
 Do not let the bare speaker wires touch
each other.
 Do not stand or sit on the speakers. You may
be injured.
 Do not allow any objects to fall into or to be
placed in the bass reflex duct.
Incorrect
LEFT SPEAKER
RIGHT SPEAKER
SPEAKERS
LIGHT-UP
RIGHT
LEFT