User guide

LexiconGetting Started

Input Trim

Sets the level of the in-

coming analog signal.

Front Panel Overview

PROGRAM

Selects programs. Push and

turn to select Banks.

System

Accesses System mode. Use EDIT

knob 1 to select parameters; knob 3

to change the parameter setting.

Tap/Cancel

Flashes for tempo-based

programs. Press twice to

set a tempo. Hold to have

audio input level or dialed-

in value determine tempo.

(When pressed with Store

activates MIDI Learn.)

* The level indicators are at their minimum size when the incoming signal is low (more than 30dB below full scale). The highest level indicators

are highlighted when the signal approaches full scale.

Load

Loads the selected program.

LED lights to indicate another

program is cued.

Store

Initiates store procedure.

(When pressed with Tap, ac-

tivates MIDI Learn.)

Edit Pages

Accesses additional edit

pages. Embedded LED lights

to indicate program is altered

but not stored.

Bypass

Mutes or bypasses the signal

depending on the setting of the

System Bypass parameter.

EDIT

Knobs 1-4 adjust parameters

1-4 on the display.

Display

LCD shows input type, real-time

meters, program and bank informa-

tion, one page of four editable param-

eters, routing information, tempo rate.