User guide

LexiconProgram Descriptions
36
About the Dual Programs (Banks 14-24)
The Dual programs combine either a Delay or Reverb algorithm with a Flange, a Pitch or a Chorus.
The Effects Lvl/Bal parameter (Page 1 Edit knob 3) controls the relative balance of each effect in
the combination.
Four routing configurations are used in the Dual programs: Dual Stereo (Parallel), Cascade, Mono
Split and Dual Mono.
Bank 14 (Special FX) contains programs which use a variety of crouting configurations. The
remaining Banks (15-23) are organized as follows:
In Banks 15-21, the first six programs in each Bank are set up in the Parallel configuration - two
stereo programs placed side by side so that they receive and output stereo audio from both left and
right channels. The last four programs in each Bank are set up in the Cascade configuration - two
stereo programs, one placed after the other (for example, Flange-Delay, Flange passes its stereo
signal to the Delay).
Banks 22 and 23 are set up in the Mono Split configuration which is similar to Parallel, but here, one
program (Flange) receives audio from the left input and the other program (Delay) receives audio
from the right input. Both programs then output stereo audio.
Because Dual Mono programs are mixed differently, we've grouped them all in the last preset Bank
(24). In these programs, one program (Flange) appears on the left channel only and the other
program (Delay) appears on the right channel only.