User guide

MPX 500 User Guide System Mode
19
Operating Mode
Allows the MPX 500 front panel controls to be locked into their current settings, or to be placed in
continuous program load cycle for demonstration purposes.
When Locked is selected, only the User Bank is available. Program Load Mode is set to Auto Load
and only Bypass, Program Select and System modes are available. Edit Mode is not available and
Tempo and Patches cannot be Learned.
Changes to this parameter take effect on the next power cycle.
Memory Protect
When enabled, this parameter prevents changes to system parameters and User programs.
Auto Load
When enabled, programs will load approximately 3/4 second after selection. When disabled, Load
must be pressed to load selected programs.
MIDI Dumps (Dump User Bank, Dump Current Program, Dump System Data)
These selections allow you to execute MIDI Dumps. See MIDI Operation.
Clear User Bank
Selecting this parameter will arm a reinitialization procedure that will erase the contents of the User
Bank and restore it to its factory state. Pressing Store will execute the procedure.
Factory Init
Selecting this parameter will arm a reinitialization procedure that will restore all of the adjustable
parameters in the MPX 500 to their factory default states. This includes all User programs, System
parameters and Learned patches. Pressing Store will execute the procedure.