User guide

MPX 500 User Guide System Mode
15
System Mode
System parameters and MIDI dumps are activated in System mode. To enter this mode, press
System. The System LED will light to indicate you are in System mode.
The adjustable parameters available in this mode are described on the following page. Edit knob 1
will select parameters, edit knob 3 will change the selected parameter's setting.
Except for MIDI dumps and reinitialization commands, which require confirmation to execute, system
parameter changes are effected immediately.
Pressing System again will return the unit to its previous running mode.
The System LED will
light when System
mode is active.
Use Edit knob 1 to select
System mode parameters.
Use Edit knob 3 to change
the selected parameter.