Specifications

9/3/05 CD-MPX100H_3.fm
E-29
CD-MPX100H
ENGLISH
TINSZA162AWZZ
References
Troubleshooting chart
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
■
General
■
CD player
■
Tuner
■
Cassette deck
Symptom Possible cause
●
The clock is not set to the
correct time.
●
Did a power failure occur? Reset
the clock. (Refer to page 11.)
●
When a button is pressed,
the unit does not respond.
●
Set this unit to the power stand-
by mode and then turn it back on.
●
If the unit still malfunctions, reset
it. (Refer to page 30.)
●
No sound is heard.
●
Is the volume level set to "0"?
●
Are the headphones connected?
●
Are the speaker wires discon-
nected?
Symptom Possible cause
●
Playback does not start.
●
Is the disc loaded upside down?
●
Playback stops in the
middle or is not performed
properly.
●
Does the disc satisfy the stan-
dards?
●
Is the disc distorted or
scratched?
●
Playback sounds are
skipped, or stopped in the
middle of a track.
●
Is the unit located near excessive
vibrations?
●
Is the disc very dirty?
●
Has condensation formed inside
the unit?
Symptom Possible cause
●
The radio makes unusual
noises continuously.
●
Is the unit placed near the TV or
computer?
●
Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
Symptom Possible cause
●
Cannot record.
●
Is the erase-prevention tab
removed?
●
Cannot record tracks with
proper sound quality.
●
Is it a normal tape? (You cannot
record on a metal or CrO tape.)
●
Cannot erase completely.
●
Sound skipping.
●
Is there slack in the tape?
●
Is the tape stretched?
●
Cannot hear treble.
●
Are the capstans, pinch rollers,
or heads dirty?
●
Sound fluctuation.
●
Cannot remove the tape.
●
If a power failure occurs during
playback, the heads remain
engaged with the tape. Do not
open the compartment with
great force.