Specifications

9/3/05 CD-MPX100H_1.fm
E-7
TINSZA162AWZZ
CD-MPX100H
ENGLISH
Preparation for Use
■
FM/AM loop aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf, or attach it to a stand
or a wall.
Notes:
●
Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
●
Do not connect the attached FM aerial to an external FM aerial.
Otherwise trouble may occur.
Installing the AM loop aerial:
<Assembling>
<Attaching to the wall>
■
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
■
Placing the speaker system
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
Wall
Screws
(not supplied)
●
Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
●
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
●
Do not let the bare speaker wires touch
each other.
●
Do not allow any objects to fall into or to be
placed in the reflex ducts.
Incorrect
●
Do not stand or sit on the speakers. You may be injured.
Left speaker Right speaker