Specifications

04/2/9 CD-MPS800W(Z)E2.fm
E-11
ENGLISH
TINSZA063AWZZ
CD-MPS600W
CD-MPS700W
CD-MPS800W
4
Preparation for Use
! Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
! Placing the speaker system
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
Note:
The speaker grilles are not removable.
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
"
Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
"
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
"
Do not let the bare speaker wires touch
each other.
"
Do not stand or sit on the speakers. You may
be injured.
Incorrect
Left speaker Right speaker
Black
Red
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals