User`s guide

AcuLaser M4000 Series User's Guide
Using the Control Panel 94
Canceling Printing
You can cancel printing from your computer by using the printer driver.
To cancel a print job before it is sent from your computer, see “Canceling Printing” on page 166.
Using the Cancel Job button
The + Cancel Job button on your printer is the quickest and easiest way to cancel printing.
Pressing this button cancels the currently printing job. Pressing the + Cancel Job button for more
than two seconds deletes all jobs from the printer memory, including jobs the printer is currently
receiving or printing.
Using the Reset menu
Selecting Reset from the control panel’s Reset Menu stops printing, clears the print job being
received from the active interface, and clears errors that may have occurred at the interface.
Follow the steps below to use the Reset Menu.
1. Press the r Enter button to access the control panel menus.
2. Press the d Down button several times until Reset Menu appears on the LCD panel, then press
the r Enter button.
3. Press the d Down button several times until Reset to display.
4. Press the r Enter button. Printing is canceled. The printer is ready to receive a new print job.