User`s guide

AcuLaser M4000 Series User's Guide
Using the Control Panel 79
Password Config Menu
*
The default password is blank. You can enter up to 20 characters for the password.
Password Config
Changes the password. Enter the old password first and then enter the new password twice.
To enter the password, press the d Down or u Up button to select the character and press the
r Enter button to determine the character. After all characters are determined, press the OK
button.
Limitation
Changes the restriction range. When Interface is selected, the password is required to change the
settings in the USB and Network menus. When Config is selected, the password is required to
enter Quick Print Job or Confidential Job, or to change the settings in all menus. When All is
selected, the password is required to enter Quick Print Job or Confidential Job, or to change
the settings and to perform the items in all menus. Before changing the setting, you have to enter
the password set in the Password Config setting.
Item Settings (default in bold)
Password Config
*
-
Limitation Disable, Interface, Config, All