User`s guide

AcuLaser M4000 Series User's Guide
Using the Control Panel 65
Reset Menu
Clear Warning
Clears warning messages that show errors except for these that occur from consumable products
or mandatory-replacement parts.
Clear All Warnings
Clears all warning messages that appear on the LCD panel.
Reset
Stops printing and clears the current job received from the active interface. You may want to reset
the printer when there is a problem with the print job itself and the printer cannot print
successfully.
Reset All
Stops printing, clears the printer memory, and restores the printer settings to their default values.
The print jobs received from all interfaces are erased.
Note:
Performing Reset All clears print jobs received from all interfaces. Be careful not to interrupt someone else’s
job.
SelecType Init
Restores the control panel menu settings to their default values.
Reset Fuser Counter
Reset the fuser unit life counter when you replace the fuser unit.
Reset Maintenance Counter
Reset the maintenance unit life counter when you replace the maintenance unit.
Quick Print Job Menu
This menu allows you to print or delete print jobs that were stored in the printer’s memory using
the Quick Print Job feature (Re-Print Job, Verify Job, Stored Job) of the printer driver’s Reserve Job
function. For instructions on using this menu, see “Using the Quick Print Job Menu” on page 91.