User`s guide

AcuLaser M4000 Series User's Guide
Using the Control Panel 58
Emulation Menu
Note:
You can specify different emulations for each interfaces.
*
Available only when an optional Type-B interface card is installed.
Printing Menu
Note:
The settings are overridden by the settings made in the printer driver.
*1
Custom-size paper is 76.2 × 127.0 mm at the minimum and 215.9 × 355.6 mm at the maximum.
*2
If Resolution is set to 1200, these settings are invalid even if set to On.
*3
Not available in PCL mode.
*4
Available only when the optional Duplex Unit is installed.
Item Settings (default in bold)
Parallel Auto, ESCP2, FX, I239X, PS3, PCL
USB Auto, ESCP2, FX, I239X, PS3, PCL
Network Auto, ESCP2, FX, I239X, PS3, PCL
AUX
*
Auto, ESCP2, FX, I239X, PS3, PCL
Item Settings (default in bold)
Page Size A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10, DL, C5, C6, IB5, CTM
*1
Wide A4 Off, On
Orientation Port, Land
Resolution 300, 600, 1200
RITech
*2
On, Off
Toner Save
*2
Off, On
Density 1, 2, 3, 4, 5
Image Optimum
*3
Auto, Off, On
Top Offset -99.0 ... 0.0 ... 99.0 mm in 0.5 increments
LeftOffset -99.0 ... 0.0 ... 99.0 mm in 0.5 increments
T Offset B
*4
-99.0 ... 0.0 ... 99.0 mm in 0.5 increments
L Offset B
*4
-99.0 ... 0.0 ... 99.0 mm in 0.5 increments