User`s guide

AcuLaser M4000 Series User's Guide
Getting to Know Your Printer 23
Control panel
a. LCD panel Displays printer status messages and control panel menu settings.
b. Cancel Job button Press once to cancel the current print job. Press and hold for more
than two seconds to delete all jobs from the printer memory.
c. Data light (Green) On when print data is stored in the print buffer (the section of
printer memory reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
d. Ready light (Green) On when the printer is ready, indicating that the printer is ready to
receive and print data.
Off when the printer is not ready.
e. Start/Stop button When the printer is printing, pressing this button stops the
printing.
When the error light is flashing, pressing this button clears the
error and switches the printer to ready status.
f. Error light (Orange) On or flashes when an error has occurred.
g.
h.
i.
j.
k.
Enter button
Down button
Back button
OK button
Up button
Use these buttons to access the control panel menus, where you
can make printer settings and check the status of consumable
products. For instructions on how to use these buttons, see “Using
the Control Panel Menus” on page 53.