User`s guide

AcuLaser M4000 Series User's Guide
Technical Specifications 202
Interfaces
Parallel Interface
Use the IEEE 1284-I compliant parallel interface connector.
ECP mode/Nibble mode
USB interface
USB 2.0 High Speed mode
Note:
❏ Only computers equipped with a USB connector and running Windows XP, XP x64, Me, 98, 2000,
Server 2003, or Server 2003 x64, support the USB interface.
❏ Your computer must support USB 2.0 in order to use USB 2.0 as the interface to connect your computer
to the printer.
❏ Since USB 2.0 is fully compatible with USB 1.1, USB 1.1 can be used as an interface.
❏ USB 2.0 can be used with Windows XP, XP x64, 2000, Server 2003, and Server 2003 x64, operating
systems. If your operating system is Windows Me or 98, use a USB 1.1 interface.
Ethernet interface
You can use an IEEE 802.3 100BASE-TX/10 BASE-T straight-through shielded, twisted-pair
interface cable with an RJ45 connector.