User guide

M4000 Insulation Analyzer User Guide

72A-1230 Rev. F 3-17

July 22, 2005

DTA Mode

The remainder of this chapter describes how to run tests in the Doble Test

Assistant (DTA) Mode. For a complete description of the DTA program, refer

to the DTA Field System for Windows Users Guide. It is recommended that

this manual be available for reference.

NOTE The DTA Mode is not available unless the DTA software has been

purchased and has been loaded onto the M4000. If you are not using DTA,

all testing with the M4000 will be done in the “CIipboard” mode, as

described earlier.

DTA Tests

With no test type selected, the main M4000 screen appears as follows:

Figure 3.11 M4000 Main Window

To test in the DTA Mode:

• Click on the icon,

• Select the “Mode” item on the menu bar using the mouse, or by

pressing ALT+M. Then select DTA option.

Either the icon or the menu method will bring you to the DTA Data Manager,

seen in Figure 3.12.