User guide

M4000 Insulation Analyzer User Guide
72A-1230 Rev. F 4-77
July 22, 2005
5. Remove the replacement Guard Board from its anti-static bag and guide it
into the slot. Press down evenly on the insides of the PC extractors until
the board is firmly seated.
6. Reattach the two connectors to the board (W9 to J2 and W9 to J3).
7. Reattach the ribbon cable to the board (W8 to J1).
8. Replace the card cage cover by reversing the steps in ”Removing the Card
Cage Cover” on page 4-48.
9. Replace the top and front covers by reversing the steps in ”Removing the
Front and Top Covers” on page 4-46.