Specifications

Changing the Whole Filter Wheel
The whole filter wheel can be changed at once. It is necessary to remove the
front part of the camera case the same way as in the case of changing
filters.The filter wheel can be removed when you unscrew the bolt on the center
of the front part of camera case. Take care not to damage the horseshoe-shaped
optical bar when replacing the filter wheel.
Changing the Telescope Adapter
The camera head contains bolt square. The telescope adapter is attached by four
bolts. If you want to change the adapter, simply unscrew these bolts and replace
the adapter with the new one.
Power Supply Fuse
The power supply inside the camera is protected against connecting of inverted-
polarity power plug or against connecting of too-high DC voltage (above 15 V)
by a fuse. If such event happens and the cooling fans on the back side of the
camera do not work when the camera is connected to proper power supply,
return the camera to the service center for repair.
58