Specifications

USB port (different USB connector on the PC or through the USB hub),
Windows reports “found new hardware” again and asks you to install the
software. Repeating the installation again brings no problem, but you can also
point Windows to use the same “oemXX.inf” (in the “\windows\inf” folder)
and “g2ccd2.sys” (in the “\windows\system32\drivers” folder) files, which are
already installed.
SIMS Software Installation
The Simple Image Manipulation System software package is designed to
operate without the necessity to be installed in any particular folder. The
package can be even run directly from CD-ROM.
SIMS package is distributed in the two forms:
1. On the CD-ROM supplied with the camera. There is a folder named
“SIMS” on the CD-ROM, which contains the unpacked version of the
software. It is enough to just copy the folder to any place on the hard
drive the user chooses.
2. In the form of zipped archive “sims.zip”, which can be downloaded
from the web site. Similarly, it is enough to un-zip the archive file to
any folder the user chooses.
Un-installing of the SIMS is also quite easy – just delete the SIMS folder.
No matter how is the package installed, the software is run by launching the
“sims.exe” main program file.
SIMS configuration files
The software package distinguishes two types of configuration:
● Global configuration, common for all users.
● User-specific configuration.
Global configuration defines which hardware is used and which drivers
controls it. The configuration is stored in the simple text file “sims.ini”, which
must be placed in the same folder as the “sims.exe” main executable. The file
may look for example like this:
[Camera]
26