Specifications

04/3/22 CD-G10000V(Z)E1.fm
E-10
ENGLISH
TINSZA092AWZZ
4
CD-G10000V
CP-G10000
Preparation for Use
" Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
" Speaker connection
Front speakers:
Connect the black wire to the FRONT SPEAKERS (-) terminal, and
the red wire to the FRONT SPEAKERS (+) terminal.
Surround speakers:
Connect the black wire to the SURROUND SPEAKERS (-) terminal,
and the grey wire to the SURROUND SPEAKERS (+) terminal.
Caution:
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
!
Connect the speaker wires to the speakers first, then to the unit.
!
Never mistake the FRONT SPEAKERS and the SURROUND-
SPEAKERS terminals. The unit or the speakers may be damaged.
!
If you use other speakers with impedance lower
than that specified, the unit may be damaged. Front
speakers: 8 ohms Surround speakers: 16 ohms
!
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
!
Do not let the bare speaker wires touch each
other.
!
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
!
Do not stand or sit on the speakers. You may be in-
jured.
Black
Red
Front speaker (right)
Surround speaker (right) Surround speaker (left)
Front speaker (left)
Grey
Incorrect
Incorrect
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals