Operating instructions

Additional Information
105
GB
Dimensions (approx.) 430 mm × 93 mm × 400
mm (w/h/d) incl.
projecting parts
430 mm × 93 mm × 430
mm (w/h/d) (incl. Wireless
transceiver)
Mass (approx.) 5.4 kg
Surround amplifier (TA-SA100WR)
Amplifier Section
Stereo mode (rated) 80 W + 80 W (at 3 ohms,
1 kHz, 1% THD)
Surround mode (reference) RMS output power
143 W (per channel at 3
ohms, 1 kHz, 10% THD)*
* Depending on the source, there may be no sound
output.
Rated impedance 3 - 16 Ω
General
Power requirements 220 V - 240 V AC,
50/60 Hz
Power consumption On: 50 W
Dimensions (approx.) 85 mm × 100 mm × 330
mm (w/h/d) (incl. Wireless
transceiver)
85 mm × 100 mm × 345
mm (w/h/d) incl. speaker
cord cover and speaker
cord holder
Mass (approx.) 1.7 kg incl. speaker cord
cover and speaker cord
holder
Wireless transceiver (EZW-RT10/EZW-
RT10A*)
Communication system S-AIR Specification
version 1.0
Frequency band 2.4000 GHz - 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 mm × 13 mm × 60 mm
(w/h/d)
Mass (approx.) 24 g
* European models only.
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.