Service manual

CD-SW250DVD
2 – 4
3.3. DVD TEST Mode
1. Press the DISC2 buttonon the main unit from the TEST Mode
initial condition to enter "DVD TEST".
(Press the "1" key of the remote control.)
(TEST Mode initial screen)
Press SKIP UP/DOWN button to move to next page
Press RETURN button to return to initial screen.
TEST MODE 1/2
MODEL
DATE
F/E VER
B/E VER
RO*: Region No.
S/N
VER DV
TEST MODE 2/2
VIDEO UCODE VER
AC-3 UCODE VER
OTS UCODE VER
LPCM UCODE VER
MPEG-BC UCODE VER
JPGE UCODE VER
CDDA UCODE VER
MP3 UCODE VER
WMA UCODE VER
DET UCODE VER
NOISE UCODE VER
F0000000 00000000
Note:
1. Press the DISC2 button on the main unit from the TEST Mode
initial condition to enter "DVD TEST".
LASER TEST Mode
(TEST MODE iitial screen)
The screen display as shown on the left.
The spin rotates
approx. 1 sec.
The pick slightly moves
in the circumference
direction.
DVD Laser lights on.
DYNAMIC TEST
LASER TEST
DVD LASER ON
DVD laser lights off and
CD laser lights on.
The spin rotates approx.
1 sec.
The pick slightly moves in
the circumference direction.
LASER TEST
CD LASER ON
1 : LASER TEST
2 : STEP TEST
3 : PLAY TEST
4 : PLAY TEST NO TRAY
Press the (3) key.
F0000000 00000000
Press the (1) key. Press the (1) key.
Press the (1) key.
Laser lights off.
The spin rotates approx.
1 sec.
The pick slightly moves in
the circumference direction.
LASER TEST
LASER OFF
Press the (1) key to shift to "DVD LASER ON".
Press the "STOP" key to return to the "DYNAMIC TEST" screen.