User Manual

ManualsBrandsSharp ManualsSpeaker SystemCD-DP900E

– 1 –

This Quick Guide will help you to correctly

install and operate your system.

CD-DP900E

MINI COMPONENT SYSTEM

Accessories

123

Remote control battery installation

Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included.

Remove the

Insert the batteries

Replace the cover.

battery cover.

as shown.

TINSZ0823AWZZ A0201.HK

FM aerial × 1

Remote control × 1 AM loop aerial × 1

If you require any advice or assistance regarding

your Sharp product, please visit our web-site

www.sharp.co.uk/support.

Customers without Internet access may telephone

08705 274277 during office hours (or (01) 676 0648

if telephoning from Ireland).

0101

CD-DP900E_QG 02.1.16, 11:46 AM1

Summary of content (4 pages)

PAGE 1
This Quick Guide will help you to correctly install and operate your system. CD-DP900E MINI COMPONENT SYSTEM If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland).
PAGE 2
3 System connections Before turning the power on, be sure to remove the transport screw on the back of the unit using a flat head screwdriver or a coin. FM aerial AM loop aerial Surround speaker (Right) Surround speaker (Left) Centre speaker Front speaker (Left) Front speaker (Right) Wall socket (AC 230-240 V, 50 Hz) Centre speaker Surround speaker (Right) RCA lead (not supplied) Surround speaker (Left) To the line output sockets VCR, DVD, etc.
PAGE 3
4 Turn on your system The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. 1 Press the EQUALIZER/X-BASS/ DEMO button to cancel the demonstration mode. 2 Press the ON/STAND-BY button to turn the power on. Listening to a CD (CDs) 1 Press the CD button. 2 Press the 7 OPEN/CLOSE button to open the disc tray. 3 Place the CD(s) on the disc tray, label side up.
PAGE 4
Listening to a cassette tape (TAPE 1 or TAPE 2) 3 4 TAPE 1 ■ 1 Open the cassette door by pushing 7 PUSH EJECT”. the area marked “7 2 Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. 3 Press the TAPE (1 V 2) button to select the cassette you want to listen to. 4 Press the 0 / R button to start playback.