MINI COMPONENT SYSTEM Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MODEL CD-DP2400H Mini Component System consisting of CD-DP2400H (main unit), CP-DP2400H (front speakers), GBOXS0072AWM1 (centre speaker) and GBOXS0073AWM1 (surround speakers). CD-DP2400H OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www.
CD-DP2400H Special notes WARNINGS 2 - Special notes - Important Instruction NOTES FOR USERS IN THE U.K. AND IRELAND The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
Contents Accessories Page CD-DP2400H Please confirm that the following accessories are included. " General Information Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD-DP2400H Precautions " General " Volume control ! Please make sure that the unit is positioned in a well-ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 20 cm (8") of free space on the top of the unit. The sound level at a given volume setting depends on speaker efficiency, location, and various other factors.
Controls and indicators CD-DP2400H " Front panel 2 8 3 4 5 9 6 10 12 13 15 14 17 11 16 21 22 23 18 19 20 24 25 26 27 28 29 30 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) 5 - Controls and indicators - 7 1. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2. Disc Skip Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . .
CD-DP2400H Controls and indicators (continued) ! Display 2 1 3 4 - Controls and indicators - General Information 3 5 6 7 8 9 10 11 12 13 14 15 ! Rear panel Reference page 1. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11 2. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11 3. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . . . . . . . .26 4. AC Power Lead . . . . . . . . . . . . . . . . . . . . .
CD-DP2400H ! Front speaker 1. Tweeter 2. Woofer 3. Bass Reflex Duct 4. Speaker Wire 1 Front speaker grilles are removable: 3 4 ! Centre speaker 1. Full-Range Speaker 2. Speaker Wire 1 ! Surround speaker 2 1. Full-Range Speaker 2. Speaker Wire Notes: " The speaker grilles on the centre and surround speakers are not removable. " When the surround speakers are not installed on the wall, the speaker badge will be upside down.
CD-DP2400H Controls and indicators (continued) ! Remote control 1 2 Reference page 18 - Controls and indicators - General Information 3 4 19 5 20 21 6 7 8 9 10 11 12 13 14 22 23 24 25 26 27 28 15 29 16 30 17 8 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 2. Surround Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . .28 3.
Remote control CD-DP2400H ! Test of the remote control ! Battery installation Check the remote control after checking all connections have been made correctly. (See pages 10 - 12.) Face the remote control directly to the remote sensor on the unit. Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1 Remove the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. Press the ON/STAND-BY button.
CD-DP2400H System connections FM aerial Surround speaker (Right) AM loop aerial Surround speaker (Left) - System connections - Preparation for Use Centre speaker VCR, DVD, etc. (not supplied, see page 26.) not supplied Front speaker (Left) Front speaker (Right) Wall socket (AC 230 V, 50 Hz) 10 Web-site: www.sharp.co.
CD-DP2400H ! Aerial connection ! Speaker connection Supplied FM aerial: Front speakers Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Centre speaker Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+) terminal. Connect the black wire to the CENTER (-) terminal, and the orange wire to the CENTER (+) terminal.
CD-DP2400H System connections (continued) ! Placing the speaker system ! To mount the surround speakers on the wall To enjoy the surround effect, we recommend that you place each speaker as shown to the below. The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the below. Centre speaker Main unit 5 mm (3/16") TV Front speaker (Left) Front speaker (Right) Min.
General control CD-DP2400H ! Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME decreasing. button to increase the volume and the VOLUME 0 1 button for 2 ..... 29 30 MAXIMUM ! Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.
CD-DP2400H Setting the clock 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. " Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. " When the 12-hour display is selected, "AM" will change automatically to "PM". Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display.
Listening to a CD (CDs) CD-DP2400H 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD button. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. 5 Press the 8 cm (3") OPEN/CLOSE button to close the disc tray.
CD-DP2400H Listening to a CD (CDs) (continued) 7 Press the / ( ) button to start playback. " To locate the beginning of a track To move to the beginning of the next track: Press the CD Playback - Listening to a CD (CDs) - ! Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. ! When the last track on the third disc has finished playing, the CD player will stop automatically.
Repeat or random play " Starting Playback with a Desired Track You can play a disc starting with the desired track. 1 CD-DP2400H " Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs: Whilst in the stop mode, press one of the DISC-1 - DISC-3 buttons or DISC SKIP button to select the desired disc. Press the / ( ) button twice.
CD-DP2400H Programmed play You can choose up to 32 selections for playback in the order you like. 2 Press the or button to select the desired track. Selected track number You can also select a track by pressing the remote control. or / button on the Press the MEMORY/SET (MEMORY) button to save the track number. Playback order - Programmed play - CD Playback 3 / When the track is memorised, "MEMORY" will appear. 4 Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be programmed.
Listening to the radio CD-DP2400H 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( station. Manual tuning: Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Press the TUNING/TIME button as many times as required to tune in to the desired station. Auto tuning: ! When radio interference occurs, auto scan tuning may stop automatically at that point.
CD-DP2400H Listening to the memorised station " To recall a memorised station " Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Press the PRESET ( the desired station. or ) button for less than 0.5 seconds to select Perform steps 1 - 3 in "Listening to the radio" on page 19. Press the MEMORY/SET button to enter the preset tuning saving mode.
Listening to a cassette tape (TAPE 1 or TAPE 2) Playback is possible in TAPE 1 compartment as well as in TAPE 2. Press the ON/STAND-BY button to turn the power on. 3 Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. Open the cassette door by pushing the area marked " EJECT". TAPE 1 4 Press the TAPE (1 listen to. 5 Press the / PUSH TAPE 2 2) button to select the cassette you want to button to start playback.
CD-DP2400H Recording to a cassette tape Before recording: ! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. ! The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). ! For recording, use only normal tapes. Do not use metal or CrO tapes.
CD-DP2400H " Recording from the radio You can record from TAPE 1 to TAPE 2. Tune in to the desired station. (See page 19.) Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. 1 2 Wind past the leader of the tape, on which recording cannot be performed. Press the REC/PAUSE ( button. ) It is recommended that the recording tape is the same length as the master tape. Recording will be paused.
CD-DP2400H Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. " Timer playback or timer recording Before setting timer: Timer recording: The unit turns on and starts recording from the tuner at the preset time. 1 Press the CLOCK button to check that the clock is on time. Sleep operation: The radio, compact disc and cassette tape can all be turned off automatically.
CD-DP2400H 6 7 Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button. " Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. The unit will enter the timer stand-by mode automatically. or ) button.
CD-DP2400H Enhancing your system The connection lead is not included. Purchase a commercially available lead as shown below. VCR, DVD, etc. ! Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/ AUX sockets. When using video equipment, connect the audio output to this unit and the video output to a television.
Enjoy the surround sound ! Dolby Pro Logic Surround (Normal or Phantom) mode By connecting this unit to other equipment (DVD player, VCR, etc.) with the trademark and playing it, you can enjoy Dolby Pro Logic Surround sound. CD-DP2400H To listen in the normal or phantom mode: 1 2 3 Connect the equipment you want to play (see page 26). Press the VIDEO/AUX button. Press the DOLBY PRO LOGIC button on the remote control to select the Dolby Pro Logic Surround mode.
CD-DP2400H Enjoy the surround sound (continued) 2 Adjust the speaker volume level whilst the test tone is being output from the centre or surround speakers. To set the centre speaker volume to the level of the front speakers: When in the normal mode, press the CENTER LEVEL button to increase the volume and the CENTER LEVEL button to decrease it. -9 ... 0 ...
Troubleshooting chart Symptom " The clock is not on time. Possible cause " Did a power failure occur? Reset the clock. (Refer to page 14.) " When a button is pressed, the unit " Set this unit to the power stand-by mode does not respond. and then turn it back on. " If the unit still malfunctions, reset it. (Refer to page 30.) " No sound is heard. Symptom " Cannot record. " Cannot record tracks with proper sound quality. " Cannot erase completely.
CD-DP2400H Troubleshooting chart (continued) Maintenance ! If trouble occurs ! Cleaning the tape-handling parts When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ! General Output terminals Input terminals Front speakers: RMS: 60 W (30 W + 30 W) (10 % T.H.D.) RMS: 46 W (23 W + 23 W) (0.9 % T.H.D.) Centre speaker: RMS: 20 W (10 % T.H.D.
TERMS OF GUARANTEE Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below:1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by Sharp. 2.
