Owner's Manual

2008/June/19 CD-DK890N_US_N
43
CD-DK890N
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
 General
 Amplifier
 CD player
 Tuner
 Cassette deck
 Speaker
Power source AC 120 V ~ 60 Hz
Power consumption 105 W
Dimensions Width: 10 - 1/4" (260 mm)
Height: 13" (342.7 mm)
Depth: 12 - 7/8" (324 mm)
Weight 16.32 lbs. (7.4 kg)
Output power RMS : Total 250 W (125 W per channel into
6 ohms at 1 kHz, 10% Total
harmonic distortion.)
FTC : 90 W minimum RMS per channel
into 6 ohms from 100 Hz to 20 kHz,
10% Total harmonic distortion.
Output terminals Front Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals Audio In (audio signal):
250 mV/47 k ohms
Video output: 1Vp-p
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Frequency
response
50 - 14,000 Hz (normal tape)
Signal/noise ratio 55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter 0.3 % (WRMS)
Type 2-way type speaker system
2" (5 cm) tweeter
6 - 5/16" (16 cm) woofer
Maximum input
power
250 W
Rated input power 125 W
Impedance 6 ohms
Dimensions Width: 7 - 7/8" (200 mm)
Height: 13" (330 mm)
Depth: 8 - 11/16" (220.5 mm)
Weight 7.0 lbs. (3.18 kg)/each