Owner's Manual

2008/June/19 CD-DK890N_US_N
35
CD-DK890N
Tape Recording
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
 Recording from the radio
To interrupt recording:
Press the button.
To resume recording, press the / (TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise while recording an AM station, move the
AM loop antenna.
 Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
 Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
6 Within 5 seconds, press the / button to start recording.
 Recording is started from the selected disc. When the
playback of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
 Playback of the disc will start approximately 7 seconds after
the tape starts.
1 Program discs and tracks (see page 25).
2 Press the button.
3 Press the / (TAPE ) button to start recording.
1 Tune in to the desired station (see page 30).
2 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3 Press the button.
Recording will be paused.
4 Press the / (TAPE ) button to start recording.
1 Press the ON/STAND-BY button to turn the power on.
2 Load a prerecorded cassette
into the TAPE 1 cassette
compartment. Insert a blank
tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is the same length as
the master tape.
3 Press the TAPE (1 2) button until “TAPE 1” appears on
the display.
4 Press the button.
Recording will be paused.
5 Press the / (TAPE ) button to start dubbing.
1 Load the tape to be erased into the TAPE 2 cassette
compartment with the side to be erased facing toward you.
2 Press the TAPE (1 2) button until “TAPE 2” appears on the
display.
3 Press the button.
4 Press the / (TAPE ) button to start erasing.
TAPE 1 TAPE 2
C
D
4
3
2
1
5
P
R
E
S
E
T
T
U
N
I
N
G
P
R
E
S
E
T
T
U
N
I
N
G
—
V
OL.
V
OL.
P
H
O
N
E
S
R
E
C
O
R
D
/
P
L
A
Y
B
A
C
K
P
L
A
YB
A
C
K
(
P
L
A
Y
&
S
T
O
P
)