Service manual

Electrical System
32 62 690 01 Rev. CKohlerEngines.com
Fixed Ignition System
This system uses a capacitive discharge (CD) coil. Ignition timing and spark remains constant regardless of engine
speed. Timing of spark is controlled by location of ywheel magnet group as referenced to engine TDC. A typical xed
ignition system consists of:
1 magnet assembly which is permanently af xed to ywheel.
2 electronic capacitive-discharge ignition modules which mount on engine crankcase.
1 kill switch (or key switch) which grounds modules to stop engine.
2 spark plugs.
Wire Diagram-15/20/25 Amp Regulated Battery Charging System with Fixed Timing, Four Pin Connector
B
H
G
D
R
B
S
J
P
L
Q
W
E
V
C
T
O
U
A
VM
M
F
B
I
K
N
O
A Blue B Red C Green D Violet (Charging)
E White (Ignition Kill) F Connector G Battery H Battery Positive
I Battery Negative J Starter K Recti er-Regulator L Oil Sentry
M Spark Plug(s) N
Flywheel Stator
Assembly
O Ignition Module(s) P Carburetor
Q
Intake Manifold
Screw
R Starter Solenoid Stud S Ground T
Recti er-Regulator
Connector
U
Starter Solenoid
Tang
V
White
(AC Charging Leads)
W Polarity Ribs X Solenoid Lead
X