Service manual

ENWW Chapter 7 Troubleshooting 189
Processing... <JOB NAME>
copy <X> of <Y>
The printer is processing the current
job. The message indicates that
copy number X of the total number
of copies (Y) is currently being
processed.
No action necessary.
Processing... <JOB NAME>
from tray [XX]
The printer is processing the current
job and has begun to transfer
pages.
No action necessary.
Ready The printer is online and ready for
data and no status or device
attendance messages are pending.
No action necessary.
Ready Diagnostics mode The printer is online and ready for
data.
No action necessary.
REPLACE CARTRIDGE The cartridge has reached the “out”
level and CARTRIDGE OUT is set to
CONTINUE in the menus. Printing
continues until the drum life reaches
zero.
If CARTRIDGE OUT is set to STOP, this
message becomes an error and
printing does not continue until the
menu item CARTRIDGE OUT is set to
CONTINUE.
Replace the cartridge.
Request accepted please
wait
A request to print an internal page
has been accepted, but cannot be
printed now. The user must wait for
the current job to finish printing
before the internal page prints.
No action necessary.
Resetting factory
settings
The printer is executing a RESTORE
FACTORY SETTINGS command and a
cold reset.
No action necessary.
Restoring... The printer is executing one of the
following commands.
● RESTORE LAST SAVED STATE
● RESTORE PRINT MODES
● RESTORE OPTIMIZATION
● RESTORE COLOR VALUES
No action necessary.
SIZE MISMATCH
TRAY [XX]= [SIZE]
alternates with
Ready
For help press
The tray indicated is loaded with a
different size of paper than the size
configured for the tray.
Load the tray with the size
configured for the tray.
Make sure that the guides are
positioned correctly in the tray, and
then make sure that the switch in
the tray is set correctly to Custom or
Standard.
TRAY [XX]
[TYPE] [SIZE]
A tray is closed, but the user did not
change the position switch when the
tray was opened and closed.
User can select appropriate size or
type.
TRAY [XX] EMPTY
[TYPE] [SIZE]
alternates with
Ready
For menus press
The tray is out of media. Load paper in the empty tray to
clear the message.
If you do not load the specified tray,
the printer continues printing from
the next available tray with the same
paper size and type, and the
message continues to appear.
Message Description Recommended action