Service manual

ENWW Chapter 7 Troubleshooting 187
Creating... CLEANING
PAGE
The printer is generating a cleaning
page.
No action necessary.
DATA RECEIVED One of the following conditions
exists:
● The printer received data and is
waiting for a form feed.
● The printer is paused and there
is a job waiting to print.
No action necessary unless the
printer is paused.
If the printer is paused, the user can
press P
AUSE/RESUME to process the
print job.
Deleting... <JOB NAME> The printer is deleting the stored
print job.
No action necessary.
Event log empty You are attempting to view an empty
event log by selecting
SHOW EVENT
LOG
from the control panel.
No action necessary.
[FS] FILE OPERATION
FAILED
The printer received a PJL file
system command that attempted to
perform an illogical operation, such
as downloading a file to a non-
existent directory.
Press
(SELECT button) to clear
the error.
[FS] IS WRITE PROTECTED The file system device is protected,
and the printer cannot write new
files to it.
Press (SELECT button) to clear
the error.
Incorrect The user entered the wrong PIN. Wait for printer to return to previous
screen, re-enter PIN, and press
(SELECT button).
Initializing... This message appears when the
printer is turned on.
No action necessary.
Initializing permanent
storage.
This message appears when the
printer is turned on and begins to
initialize the permanent storage.
No action necessary.
INSTALL CARTRIDGE
alternates with
For help press
The print cartridge is missing and
must be reinstalled for printing to
continue.
Replace or correctly reinstall the
print cartridge.
LOAD TRAY [XX]
[TYPE] [SIZE]
The tray that is indicated is
configured for a specific type and
size of media needed by a print job,
but either the tray is empty or the
tray is not closed correctly. All other
trays are also empty.
Load the requested media in the
tray that is indicated. If there is
media in the tray, close the tray
correctly and press P
AUSE/RESUME.
LOAD TRAY [XX]
[TYPE] [SIZE]
alternates with
To use another
tray press
or
For help press
or
To continue press
A job is sent that requires a specific
type and size that is not available in
the tray that is indicated.
Perform one of these steps:
● Load the requested media into
the indicated tray and press
(S
ELECT button).
● Press to use a type and
size that are available in
another tray.
Message Description Recommended action