MINI COMPONENT SYSTEM MODEL CD-80W OPERATION MANUAL ENGLISH CD-80W mini component system consisting of C D -8 0 W (m a i n u n it ) , C P- 8 0 ( f ro n t s p e a k e r ) a n d GBOXS0041AWM1 (surround speaker).
ENGLISH INTRODUCTION Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 NAMES OF CONTROLS AND INDICATORS . . . . . . . .
SPECIAL NOTES ● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. Warning: To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Warning: This unit contains no user serviceable parts.
PRECAUTIONS ■ General ■ Care of compact discs ● Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. ● Do not use oil, solvents, petrol, paint thinners or insecticides on the unit. ● Do not expose the unit to moisture, to temperatures higher than 60˚C (140˚F) or to extreme low temperatures.
NAMES OF CONTROLS AND INDICATORS ■ Front panel 1 2 3 4 5 6 7 8 9 10 11 12 13 1415 16 17 17 17 18 19 20 21 25 22 27 23 28 24 29 26 30 31 32 33 34 35 36 37 38 39 40 11. (CD) Disc Tray 12. 13. 14. 15. 16. 17. 18. 19. 10. 11. 12. 13. 3 14. 15. 16. 17.
(Continued) ■ Rear panel 3 4 5 6 7 8 9 1 2 11. 12. 13. 14. 15. 16. 17. 18. 19. AC Voltage Selector AC Power Input Socket FM 75 Ohms Aerial Terminal FM Aerial Earth Terminal AM Loop Aerial Input Socket Span Selector Switch Video/Auxiliary (Audio Signal) Input Sockets Front Speaker Terminals Surround Speaker Terminals ■ Front speaker 1 11. 12. 13. 14. 3 Tweeter Bass Reflex Duct Woofers Speaker Wire 2 4 ■ Surround speaker 11. 12.
PREPARATION FOR USE ● Unplug the AC power lead from the AC socket before connecting or disconnecting any component. ■ Speaker connection Front speaker (Right) Front speaker (Left) Red Red Front speakers Connect each speaker wire to the FRONT SPEAKER terminals as shown. Use speakers with an impedance of 8 ohms or more, as lower impedance speakers can damage the unit. ● Connect the black wire to the minus (−) terminal, and the red wire to the plus (+) terminal.
(Continued) Installation of the surround speakers: Example: When installed on the wall Wall If possible, mount the surround speakers on the wall. lnstall them 60 - 90 cm (23" - 35") above the height of your ears when you are seated, if possible. 60 - 90 cm (23" - 35") Example: When installed vertically ■ To mount the surround speakers on the wall 3.2 mm (1/8") 5 mm (3/16") Min. 22 mm (7/8") 9 mm (3/8") 5 mm (3/16") 1 Wall mounting screw Wall surface 2 Min.
(Continued) ■ Aerial connection 1 3 2 Supplied FM aerial Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Supplied AM loop aerial FM aerial AM loop aerial Connect the AM loop aerial wire to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
(Continued) ■ AM/FM interval (span) The International Telecommunication Union (ITU) has established that member countries should maintain either a 10 kHz or a 9 kHz interval between broadcasting frequencies of any AM station. The illustration shows the 9 kHz interval zones (regions 1 and 3), and the 10 kHz interval zone (region 2). Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to AM tuning interval (span) of your area.
(Continued) ■ Demo mode (Main unit operation) When the AC power lead is first connected, the unit will enter the demonstration mode. To cancel the demonstration mode: When the unit is in the stand-by mode (demonstration mode), press the X-BASS/DEMO button. ● The demonstration mode will be cancelled and the display will disappear. To return to the demonstration mode: When the unit is in the stand-by mode, press the X-BASS/DEMO button again.
SETTING THE CLOCK In this example, the clock is set for the 24-hour (0:00) system. (Main unit operation) 1 2 3 4 MEMORY/SET ON/ STAND-BY CLOCK TUNING/ TIME ( ) Press the ON/STAND-BY button to enter the stand-by mode. Press the CLOCK button. Within 5 seconds, press the MEMORY/SET button. X W Press the TUNING/TIME ( or ) button to select the time display mode. "0:00" → The 24-hour display will appear. (0:00 - 23:59) "AM 0:00" → The 12-hour display will appear.
SOUND CONTROL (Main unit) (Remote control) ■ Volume Press the VOLUME button to increase the volume and the VOLUME button to decrease the volume. 0 1 2 ..... 29 30 MAXIMUM ■ Extra bass (X-BASS) (Main unit) (Remote control) When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "XBASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (XBASS) button. "X-BASS" will disappear.
COMPACT DISC OPERATION 4 5 ■ CD playback 12 cm (5") 8 cm (3") 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD button. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. ● CDs can be placed on any open position on the disc tray. ● Be sure to place 8 cm (3") CD(s) in the middle of the disc trays. 1 Caution: Do not stack CDs in the tray. This can damage the player and the CDs.
(Continued) ■ Disc number selection 1 2 When stopped, press the DISC SKIP button. Press the 0 (0R) button. ● The next disc playback will begin, after which each following disc will be played sequentially. DISC SKIP Note: ● When the DISC SKIP button is pressed during playback, playback will begin automatically from the next disc. (It is not necessary to press the 0 (0R) button.) ■ APSS (Auto Program Search System) DISC SKIP RANDOM APSS automatically locates the beginning of any track.
(Continued) ■ APMS (Automatic Programmable Music Selector) Selected disc number You can playback the tracks on the CDs in the disc 1 - 3 positions in any order desired. By specifying the disc numbers from 1 to 3, and the track numbers from 1 to 99, you can choose up to 32 selections for playback in the order you like. Selected track number 1 Playback order 2 3 2 5 3 1 CLEAR 3 2 5 Press the 5 (5 desired track. ) or 3 4 (2 ) button to select the 4 Press the MEMORY/SET (MEMORY) button.
RADIO OPERATION ■ Tuning (Main unit operation) 1 2,3,5,6 4 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button. Press the TUNER (BAND) button to select the desired frequency band. (FM ST, FM or AM) Press the TUNING/TIME ( desired station. Manual tuning: X or W) button to tune into the X W Press the TUNING/TIME ( or ) button as many times as required to adjust the frequency shown on the display to the frequency of the desired station.
(Continued) ■ Preset tuning (Main unit operation) PRESET( ) You can store up to 40 stations in memory (40 stations consisting of any combination of FM and AM stations you like) and recall them at the push of a button. To enter stations into memory: 1 2 Perform steps 1 - 6 in the "Tuning" section. Press the MEMORY/SET button. ● "MEMORY" and the preset channel number will flash.
CASSETTE OPERATION ■ TAPE 1 playback 1 2 1 4 3 4 5 5 Press the ON/STAND-BY button to turn the power on. Open the cassette door by pushing the area marked "PUSH EJECT". Load a cassette into the TAPE 1 cassette compartment. Press the TAPE (1 Press the 0 (0 V 2) button to select TAPE 1. ) button to start playback. R To stop playback: 3 PUSH EJECT Press the ■ button. Note: ● You can not fast-forward or rewind the cassette in the TAPE 1 compartment.
RECORDING ● When recording important selections, be sure to make a preliminary test to ensure that the desired material is being properly recorded. ● The volume and sound quality can be adjusted with no effect on the recorded signals (Variable Sound Monitor). ● Metal and CrO2 tapes should not be used for recording or dubbing. ■ Recording from the built-in CD player (CD Synchronised Recording System) 1 5 2 6 6 1 2 4 3 Press the ON/STAND-BY button to turn the power on.
(Continued) ■ Recording from the built-in radio 1 2 4 Tune in to the desired station. (See pages 16-17.) Load a cassette into the TAPE 2 cassette compartment. ● Load the tape with side A (1) facing you. ● Wind past the leader of the tape, on which recording can not be performed. 5 5 3 3 2 Press the button. ... To record on only one side. ... To record on both sides. 4 Press the REC PAUSE (● ● "REC" will flash. PUSH EJECT TAPE 2 ) button.
HOW TO USE THE BUILT-IN TIMER ● Before setting the timer, make sure that the clock setting is correct. (Page 11) (Main unit operation) ON/ STAND-BY TIMER/ SLEEP Timer set indicator TUNER (BAND) ■ Timer playback 1 2 3 CD VOLUME TAPE (1 2) MEMORY/ SET TUNING/ TIME ( ) V Press the CD, TUNER (BAND), TAPE (1 2) or VIDEO/AUX button to select the desired function, and then adjust the sound volume using the VOLUME buttons. f Press the TIMER/SLEEP button repeatedly until a white " " is displayed.
(Continued) ■ Sleep operation (Main unit operation) TIMER/ SLEEP MEMORY/ SET The radio, compact disc and cassette deck can all be turned off automatically. 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. To change the sleep time: W X Whilst the sleep time is displayed, press the TUNING/TIME ( or ) button to adjust the time. (Maximum: 3 hours - Minimum: 1 minute) The amount of sleep time can also be changed during the sleep operation.
(Continued) ■ Headphones ● Before plugging in or unplugging the headphones, make sure the volume level is reduced. ● Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. ● When headphones are connected, the speakers are disconnected automatically. Adjust the VOLUME control for the desired volume.
MAINTENANCE ■ Internal care ● Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. ● After long use, the deck’s heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. Read the demagnetiser’s instructions carefully before use.
/ MEMO
/ MEMO
SHARP CORPORATION TINSZ0637AWZZ 9906 A0010.
