Quick Start Manual

Over the Counter
™
Microwaves
valance under
adjacent cabinets
to match bottom of
OTC microwave
countertop
below
± 2" Vertical filler panel
blocking
27" upper cabinet
2' - 10"
2' - 5
1
/2"
±2"
±2"
1' - 11
7/8"
OTC microwave
'2x runners
(at microwave)
'2x runners
(at cabinet)
2
1
/4"
fasten '2x' runners to
all available studs
2' - 7"
1' - 0" typical
adjacent cabinets
Align edge of
outer wrap
with face of
adjacent
cabinets.
Valance under adjacent cabinets to
match bottom of OTC Microwave.
To allow for finish material
Provide runner at
mounting bracket
±
3
/4"
2
1
/4" inset
'2x' Runners
18" Cabinet
2' - 8"
1' - 2
1
/16"
1' - 0"
Typical cabinet
SECTION
PLAN
24"
30"
24"
18"
30"
18"
36"
36"
42"
12"
OTC outside dimensions (W x H x D)
23 7/8" x 14 1/16" x 15 9/16"
1' - 8
3
/
4
"
(at microwave)
2' - 0"
(at cabinet)
IDEAS
You can turn a blank wall into functional space. Simply mount an OTC microwave with a small cabinet above and place wall
cabinets or finished panels on the side. Below, place a conventional cabinet or use a kitchen cart for a unique application and
lighted work area.
An optional accessory kit with two stainless steel accessory
bars and eight “S” hooks (model number RK-OTC120) is
available for Sharp OTC
®
microwave ovens.
13
Separate 15 amp or greater electrical receptacle must be
located in the cabinet directly above the microwave oven.
The arrangement shown illustrates the OTC microwave
located in a corner using standard 27" wall cabinets and
custom trim wall mounting.
27" Retrofit
1 ½" Filler
1 ½" Filler
24" Cabinet
36" Retrofit
Open
Shelving
1'-11
7
/8"
OTC Microwave
Open
Open
27" Retrofit
1 ½" Filler
1 ½" Filler
24" Cabinet
36" Retrofit
Open
Shelving
1'-11
7
/8"
OTC Microwave
Open
Open