Ver1.
Table of contents Precautions ···················································································································· - 2 [Product features] ··········································································································· - 3 1. 2.
During use ・Please use and store this product in an indoor environment free from condensation of 0 ℃ (32°F) to 40℃(104°F). ・When you have found abnormalities such as unusual smell, fever, discoloration or deformation, immediately remove the hand reader from the arm and stop using it. ・Do not give a strong shock such as dropping it. ・Do not use this equipment near the cardiac pacemaker.
1. Explanation of each part Surface view ③Antenna built-in part ①Power button ④Power LED ②Speaker ⑦USB cover ⑥Work confirmation LED ⑤Bluetooth connection check LED Back view ⑧Belt passing part ① ② ③ ④ ⑤ ⑥ Power button Speaker Antenna built-in part Power LED Bluetooth connection check LED Work confirmation LED ⑦ USB cover ⑧ Belt passing part This button controls the On/Off of the Power. Output sound such as confirmation sound.
2. Usage 2.1. LED This product is equipped with multiple LEDs, and the state of the equipment can be confirmed by checking the LED. LED type Color Power LED Blue Green Yellow Red Bluetooth connection check LED Blue Red Work confirmation LED Each Color FLASH / LIGHTING FLASH LIGHTING FLASH LIGHTING FLASH LIGHTING FLASH LIGHTING FLASH LIGHTING FLASH LIGHTING Content Battery is Recharging, Battery charge completion Battery charge is enough. Battery charge is low. Just before the battery runs out.
2.5. Termination method When exiting, long press the power button, confirm that power LED and Bluetooth connection check LED are off, then release the power button. 2.6. Anomalous occurrence If abnormality such as freezing of equipment occurred, hold down the reset switch. Primary features By connecting this product to a host terminal, it is possible to send tag reading information to the host terminal.
Environmental resistance Working temperature Storage temperature band） 0 / 40 ℃ 5 / 35 ℃(During charging) (32 / 104°F 41 / 95°F) -5 / 50℃ non condensing (23 / 122°F) non condensing This product is Extremely Low-Power Radio Equipment. Applications and notifications of licenses are not required for use. 5. For FCC FCC ID:APY-BSC0003 Contains Transmitter Module FCC ID: SQK-7BLZXX This device complies with Part 15 of the FCC Rules.
