Manualshelf

Operation Manual, Teams Connector Guide

ManualsBrandsSharp ManualsDigital Copier / PrinterBP50C26|BP50C31|BP50C36|BP50C45|BP50C55|BP50C65|BP50M26|BP50M31|BP50M36|BP50M45|BP50M55|BP50M65|BP55C26|BP60C31|BP60C36|BP60C45|BP70C31|BP70C36|BP70C45|BP70C55|BP70C65|BP70M31|BP70M36|BP70M45|BP70M55|BP70M65|BP70M75|BP70M90
12345678910
Table Of Contents
5
Teams Connector Guide
* Installation of an inner finisher, a finisher or a saddle finisher is required to use "Staple Sort".
Installation of a punch module in addition to an inner finisher, a finisher or a saddle finisher is required to use "Punch".
Perform initial operation by administrator
When using Teams Connector for the first time, "Operation for permissions" and "Operation for permissions on behalf of
general user" by the Microsoft 365 administrator (tenant administrator) are required.
Once you perform the operation with a multifunction machine, it is not necessary to perform the same operation on other
multifunction machines even if you use multiple multifunction machines. Also, the general user can use Teams
Connector without acceptance operation.
Print settings Paper Size Set the print size.
2-Sided Print Specify 2-sided printing.
N-Up Printing Specify N-Up Printing.
Sort/Group Sorting and groups for output can be set.
Staple Sort
*
Specify staple sorting.
Punch
*
Specify punching.
B/W Print Prints the file in black and white.
Fit To Page Print with the file expanded to the full paper size.
1
Tap the [Teams Connector] key on the
Home screen.
If you cannot find the Teams Connector icon on the Home Screen, register the Teams Connector to the Home Screen in
the Home Screen Settings of the machine System Settings.
2
Since the Microsoft Teams login screen is displayed, enter the Microsoft 365
tenant administrator ID and password to sign in.
When you sign in successfully, "Permissions requested" screen will be displayed.
3
Select [Consent on behalf of your organization] and then select [Accept].
If you accept without selecting [Consent on behalf of your organization], the general user cannot use Teams Connector.
In this case, access the Azure portal site with a web browser, open "Azure AD" page > "Enterprise applications" page,
and delete "Teams Connector (Sharp)" from the Enterprise applications list.
Perform the initial operation of Teams Connector again after deleting.
Item Description