Operation Manual, Teams Connector Guide

4
Teams Connector Guide
BEFORE USING Teams Connector
Before using Teams Connector, the Teams Connector application must be installed on the multifunction machine.
For how to install the Teams Connector application, please contact your dealer or nearest authorized service
representative.
Basic requirements and system requirements for Teams Connector
Initial value settings on Teams Connector
Click the [Detail] key on the page which will have been displayed after selecting Teams Connector from the [System
Settings] → [Sharp OSA Settings] → [Embedded Application Settings] under the "Setting (Administrator)" to configure the
following items.
Import or export the initial value file
The following explains how to export the initial values used on a Teams Connector which a multifunction machine is
using in order to use them on another Connector that is on the other machine, and how to import an exported file which
contains an initial value setting.
Select Teams Connector from the [
System Settings ] → [ Sharp OSA Settings ] → [ Embedded Application Settings ] under
the "Setting (Administrator)".
Import the initial value file to register the following items in the detailed settings of the Teams Connector.
Item Description
Multifunction machine Sharp OSA (BP-AM10) Required
Port Control The following ports are enabled.
•
Server Port:
Sharp OSA (Extended Platform): HTTP
• Client Port: HTTPS
Direct Print Expansion Kit Required when printing xlsx, docx, and pptx files.
Other Network Settings Change the settings such as the IP Address, Subnet Mask,
Default Gateway, DNS server, and Proxy Server as
necessary.
Item Description
File Name Sets the initial value of the scan data File Name to store.
Include Date in File Name Sets whether the date and time is included with the File Name.
Item Description
Scan settings File Name Specify the initial value for the scan data File Name to store.
Include Date in File Name Sets whether the date and time is included with the File Name.
Colour Mode Specify the color mode.
Resolution Specify the resolution.
File Format Set the file format of the data to be saved.
Original Specify the originals.
Exposure Specify the density of the image.
Job Build Set the use of Job Build.
Blank Page Skip Set the use of Blank Page Skip.