Operation Manual, Web Page Settings Guide
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS GUIDE
- WEB PAGE
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- CONFIGURING THE SCANNER CONDITION SETTINGS
- CONFIGURING SMTP, DNS AND LDAP SERVER SETTINGS
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
- MAIN SETTINGS ON THE WEB PAGE
10
Web Page Settings
PCL Settings
PostScript settings
2-Sided Print 1-Sided,
2-Sided (Book),
2-Sided (Tablet)
When [2-Sided (Book)] is selected, two-sided printing takes place so as to
allow binding at the left side. When [2-Sided (Tablet)] is selected,
two-sided printing takes place so as to allow binding at the top.
Color Mode Auto, Black & White Set the color mode.
Fit To Page ON, OFF Set whether the printed image is fit to the size of the paper.
Item Settings Description
Symbol Set Select one of 35 sets. This specifies which country's characters (PCL symbol set) are assigned to
certain of the symbols in the character code list.
The factory default setting is [PC-8].
Font Select one internal
font.
This specifies which PCL font to use for printing. One font can be specified
from among the internal fonts. The factory default setting is [0: Courier].
Line Feed Code CR=CR; LF=LF;
FF=FF,
CR=CR+LF; LF=LF;
FF=FF,
CR=CR; LF=CR+LF;
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF
This specifies the line break code by means of a combination of the "CR"
(return) code, "LF" (line break) code, and "FF" (page break) code. The factory
default setting is printing based on the transmitted code. The setting can be
changed by selecting one of four combinations.
Item Settings Description
Print PS Errors Enable, Disable When this setting is enabled, an error description is printed each time a
PostScript error occurs.
Item Settings Description