Operation Manual, User's Manual

2-12
COPIER►BASIC PROCEDURE FOR MAKING COPIES
SPECIFYING THE SIZE OF THE ORIGINAL
If you want to specify an original size other than the displayed size, select “Orig. Size” from the right menu.
Orientation of the original
Place the original as shown below.
Specifying the size of the original
• Set the orientation and size of the original before scanning the original.
• If you want to specify an original size other than the displayed size, select “Orig. Size” from the right menu.
• When “Not Specified” is selected in “Orig. Size Enter” in the system settings, the original is scanned according to the paper
size of the selected tray.
Document glass Document feeder
1
Select "Original Size" in the right menu of the base screen of copy mode and
press the [OK] key.
2
Select Inch or AB with the [ ][ ] keys.
3
Select the size with the [ ][ ] keys.
For a standard original size, select Original Size, press the [OK] key, and specify the original size.
The set original size will appear in the Original Size field of the base screen.
If you are using a special original size, go to step 4.
4
For a special paper size, select "Size Input" and press
the [OK] key.
abc
abc
abc
abc
Orig. Size Enter
AB
A4
A4R
B5
Orig. Size Enter
AB
B6R
A6R
Size Input