Operation Manual, User's Manual

6-28
SYSTEM SETTINGS►SYSTEM SETTINGS
Scanner
System settings for the scanner function are explained
below.
Select the [Scanner] to configure the settings.
Disable USB Scan
Select whether or not scanning from a computer and
scanning from the machine are disabled when a USB
connection is used.
Default setting is "No" (disabled).
New Default
This is used to change the default settings for the
original size, resolution, Mono2/Greyscale, and format.
Orig. Size Enter
The paper size can be selected
AB type:
A3, B4, A4, A4R, B5, B5R, A5, A5R, B6R, A6R, Not
Specified
Inch type:
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2",
5-1/2"x8-1/2"R, Not Specified
The factory default setting for the Orig. Size Enter is “Not
Specified”.
Resolution
The scanning resolution can be selected.
The factory default setting for the resolution is "200dpi".
Format
Set the default transmission format.
The factory default setting is “PDF Medium” for
colour/greyscale, and “PDF G4” for black and white.
Mono2/Greyscale
After pressing the [B/W START] key, select whether you
want to scan the image in “Mono2” or “Greyscale”.
The factory default setting for the colour mode is
“Mono2”.