Operation Manual, User's Manual

6-24
SYSTEM SETTINGS►SYSTEM SETTINGS
Recall Setting (Busy)
This setting is used to set the number of recall attempts
and the interval between recall attempts when a
transmission is not successful due to the line being busy
or other reason.
Country Differentiation Table
Recall Set (Err)
When sending a fax, this setting is used to select
whether or not the machine will automatically re-attempt
the call if the transmission fails due to a line error.
Country Differentiation Table
The
number of
recall
attempts
The
interval
between
attempts
United Kingdom,
France, Germany,
Sweden, Italy, Spain,
Netherlands, Denmark,
Norway, Finland,
Portugal, Belgium,
Luxembourg,
Switzerland, Saudi
Arabia, South Africa,
Hungary, Czech
Republic, Slovakia,
Poland, Greece, Russia,
Vietnam
0 to 10
(default: 2)
any number
of minutes
from 1 to 15
(default: 3)
Canada, Korea 0 to 14
(default: 2)
Australia,
New Zealand,
Singapore, Thailand,
Malaysia, India, Brazil
0 to 9
(default: 2)
China, Hong Kong 0 to 3
(default: 2)
Taiwan 0 to 15
(default: 2)
any number
of minutes
from 4 to 15
(default: 4)
Even if this setting is enabled, the machine will not
re-attempt the call when a fax is sent by manual
transmission.
The
number of
recall
attempts
The
interval
between
attempts
United Kingdom,
France, Germany,
Sweden, Italy, Spain,
Netherlands, Denmark,
Norway, Finland,
Portugal, Belgium,
Luxembourg,
Switzerland, Saudi
Arabia, South Africa,
Hungary, Czech
Republic, Slovakia,
Poland, Greece, Russia,
Vietnam
0 to 5
(default: 1)
any number
of minutes
from 0 to 15
(default: 1)
Australia, Canada,
Korea
0 to 1
(default: 1)
any number
of minutes
from 0 to 15
(default: 3)
New Zealand 0 to 1
(default: 1)
any number
of minutes
from 1 to 15
(default: 3)
Singapore, Brazil 0 to 9
(default: 2)
any number
of minutes
from 0 to 15
(default: 1)
Malaysia, Thailand,
India
0 to 9
(default: 2)
any number
of minutes
from 1 to 15
(default: 1)
China, Hong Kong 0 to 3
(default: 2)
any number
of minutes
from 0 to 15
(default: 1)
Taiwan 0 to 15
(default: 2)
any number
of minutes
from 4 to 15
(default: 4)
• If the recall interval is set to "0", the machine will
immediately call again after the connection is
broken due to the line error.
• Even if this setting is enabled, the machine will not
re-attempt the call when a fax is sent by manual
transmission.